|
The BASWAphon installation is an application wherein the
product is adhered to an existing stable substrate, thus creating a sealed
substrate. Air is not passing through the product, therefore, only surface
maintenance may be required.
Surface dust can be vacuumed off or blown off by the use
of pressured air hose.
Surface stains from dirty fingerprints, food stains, and other organic stains
are removed by applying “Duct Tape” or “Masking Tape” to the affected area. This
action lifts the stain from the surface without damaging the finish.
Stains that have penetrated the surface and cannot be
removed by the above action are removed as follows: Apply a 10% solution of
hydrogen peroxide to the imbedded stain. The hydrogen peroxide can only be used
on white finished surfaces.
Water damage stains and rust stains are removed as
follows: Apply a 10% solution of hydrogen peroxide to treat imbedded stains. The
hydrogen peroxide can only be used on white finished surfaces.
Renewing the finished surface to a “like new condition”
which may be required at some future date, (at a time frame which cannot be
predicted; time based on use of the space), is accomplished as follows: Apply a
second layer of BASWAphon Top-Coat (1/2-mm thick per manufacturers installation
instructions). The same protection requirements needed for painting are to be
performed.
Once a second layer of BASWAphon Top-Coat has been
applied, future coats can only be applied when the exiting Top-Coat(s) are
removed. This is simply done by steaming off the Top-Coat(s) with a commercial
steamer, a process and equipment similar to that used for the removal wallpaper.
This is not laborious and can be done with relative ease. Subsequently, apply
new layer of BASWAphon Top-Coat (1/2-mm thick per manufacturers installation
instructions). The same protection requirements needed for painting are to be
performed.
Sound Solutions is experienced in the cleaning and repair
of the BASWAphon product and has documented that its repair is substantially
equal to the time and effort required to repair a drywall ceiling. Sound
Solutions has directed the repair of installations that have been damaged during
construction and our Certified Installers have successfully “patched and
matched” adjacent to surfaces.
Sound Solutions is willing to train the end-users
maintenance personnel in the proper cleaning, maintenance and repair of the
product, at no additional cost. Additionally, Sound Solutions is willing to
enter into a maintenance and cleaning agreement at a “cost only” basis to
alleviate any anxiety regarding this issue.
Feel free to contact Sound Solutions Sound Control, LLC at
any time to request any additional information on a particular condition.
| 
