BASWAphon is a completely
field-applied troweled on system that is applied in a three-step process,
generally taking five day. The first step involves applying approximately 3-mm
of adhesive to the rear of the BASWAphon pre-coated mineral wool supporting
panels and pressing them snuggly to the stable sealed substrate surface.
Following this, the joints as well as any cavities or voids created by the
installation, are filled with a BASWAphon-Fill. The second step involves sanding
the seam fill and applying and smoothing layer of BASWAphon-407 Base Coat. The
final step involves sanding the base coat and applying and smoothing the final
layer of BASWAphon Finish Coat. The top coat must be applied in one
continuous process until all of the desired area is covered. The topcoat
provides the appearance of a conventional plastered surface.
The quality of the surface greatly depends upon the care that went into carrying out and adhering to the manufacturing instructions. Installation is only permitted by employees certified by BASWA acoustic North America, LLC.
3900
Ben Hur Avenue, Suite 10, Willoughby,
Ohio 44094
440.951.6022 phone | 440.951.6012 fax
